Item # |
Item Name |
Description |
Wt. (lb.) |
|
|
Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozer. This is a hot cupped left hand end |
|
2C2302 |
HOT CUPPED END BIT LH |
bit that is 2" thick, 16" wide and 24" in length. |
155.00 |
|
|
Caterpillar style bolt on end bit for a Caterpillar Wheel Dozer/Compactor. This is a hot cupped |
|
2C2328 |
HOT CUPPED END BIT RH |
right hand end bit that is 1" thick, 10.3" wide and 15.44" in length. |
36.00 |
2C2384 |
LH END BIT |
Caterpillar style left hand end bit, 7/8" bolt holes; Use Item # 4J8844LH |
74.96 |
2C2385 |
RH END BIT |
Caterpillar style right hand end bit, 7/8" bolt holes; Use Item # 4J8843RH |
74.96 |
2J2571 |
RH END BIT |
Caterpillar style right hand end bit, 7/8" bolt holes; Use Item # 4J8843 |
74.96 |
2J2572 |
LH END BIT |
Caterpillar style left hand end bit, 7/8" bolt holes; Use Item # 4J8844 |
74.96 |
|
|
Caterpillar style bolt on right hand or left hand grader end bits for a 112 Caterpillar Grader. This is |
|
3B4757 |
GRADER END BIT |
a grader end bit that is .625" thick, 6" wide and 18.375" in length. |
16.75 |
|
|
Caterpillar style bolt on end bit for a D4 or a D5 Caterpillar Bulldozer. This is a level cut right |
|
3G4285 |
LEVEL CUT END BIT RH OR LH |
hand or left hand end bit that is .75" thick, 8" wide and 16.75" in length. |
26.46 |
|
|
Caterpillar style bolt on end bit. This is a level cut right hand or left hand end bit that is 1.375" |
|
3G6395 |
END BIT RH OR LH |
thick, 8" wide and 20.25" in length. |
56.44 |
|
|
Caterpillar style bolt on end bit. This is a level cut right hand or left hand end bit that is 1" thick, |
|
3G6993 |
END BIT RH OR LH |
6.25" wide and 13.5625" in length. |
22.05 |
|
|
Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand |
|
3G8277 |
HOT CUPPED END BIT RH |
end bit that is 1.625" thick, 13" wide and 22" in length. |
97.99 |
|
|
Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end |
|
3G8278 |
HOT CUPPED END BIT LH |
bit that is 1.625" thick, 13" wide and 22" in length. |
97.99 |
|
|
Caterpillar style bolt on right hand end bit for a D8 Caterpillar Bulldozer. This is a hot cupped right |
|
3G8279 |
HOT CUPPED RH END BIT |
|
98.00 |
|
|
Caterpillar style bolt on left hand end bit for a D8 Caterpillar Bulldozer. This is a hot cupped left |
|
3G8280 |
HOT CUPPED LH END BIT |
|
98.00 |
|
|
Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozers. This is a hot cupped right hand |
|
3G8281 |
HOT CUPPED END BIT RH |
end bit that is 1.625" thick, 16" wide and 27.5" in length. |
153.00 |
|
|
Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozers. This is a hot cupped left hand end |
|
3G8282 |
HOT CUPPED END BIT LH |
bit that is 1.625" thick, 16" wide and 27.5" in length. |
153.00 |
|
|
Caterpillar style right hand end bit that is 23" long, 12 1/8" wide, and 2" thick; takes 9 - 100x400 |
|
3G8283 |
RH END BIT |
plow bolts and 9 - 100 hex nuts; Use Item # 8E4197 |
155.00 |
|
|
Caterpillar style left hand end bit that is 23" long, 12 1/8" wide, and 2" thick; takes 9 - 100x400 |
|
3G8284 |
LH END BIT |
plow bolts and 9 - 100 hex nuts; Use Item # 8E4196 |
155.00 |
|
|
Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand |
|
3G8285 |
HOT CUPPED END BIT RH |
end bit that is 1.625" thick, 13" wide and 21.625" in length. |
105.01 |
|
|
Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end |
|
3G8286 |
HOT CUPPED END BIT LH |
bit that is 1.625" thick, 13" wide and 21.625" in length. |
105.01 |
|
|
Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand |
|
3G8287 |
HOT CUPPED END BIT RH |
end bit that is 1.625" thick, 13" wide and 22" in length. |
105.01 |
|
|
Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end |
|
3G8288 |
HOT CUPPED END BIT LH |
bit that is 1.625" thick, 13" wide and 22" in length. |
105.01 |
|
|
Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozers. This is a hot cupped right hand |
|
3G8289 |
HOT CUPPED END BIT RH |
end bit that is 1.375" thick, 16" wide and 27.5" in length. |
128.00 |
|
|
Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozers. This is a hot cupped left hand end |
|
3G8290 |
HOT CUPPED END BIT LH |
bit that is 1.375" thick, 16" wide and 27.5" in length. |
128.00 |
|
|
Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand |
|
3G8291 |
HOT CUPPED END BIT RH |
end bit that is 1.375" thick, 15.5" wide and 24" in length. |
103.99 |
|
|
Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end |
|
3G8292 |
HOT CUPPED END BIT LH |
bit that is 1.375" thick, 15.5" wide and 24" in length. |
103.99 |
|
|
Caterpillar style bolt on end bit for a D7 Caterpillar Bulldozer. This is a hot cupped right hand end |
|
3G8293 |
HOT CUPPED END BIT RH |
bit that is .875" thick, 13.125" wide and 21.625" in length. |
66.14 |
|
|
Caterpillar style bolt on end bit for a D7 Caterpillar Bulldozer. This is a hot cupped left hand end |
|
3G8294 |
HOT CUPPED END BIT LH |
bit that is .875" thick, 13.125" wide and 21.625" in length. |
66.14 |
|
|
Caterpillar style bolt on end bit for a Caterpillar Wheel Dozer/Compactor. This is a hot cupped |
|
3G8295 |
HOT CUPPED END BIT RH |
right hand end bit that is 1" thick, 10.3" wide and 15.44" in length. |
36.00 |
|
|
Caterpillar style bolt on end bit for a Caterpillar Wheel Dozer/Compactor. This is a hot cupped left |
|
3G8296 |
HOT CUPPED END BIT LH |
hand end bit that is 1" thick, 10.3" wide and 15.44" in length. |
36.00 |
|
|
Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped right hand end |
|
3G8297 |
HOT CUPPED END BIT RH |
bit that is 1" thick, 10.375" wide and 15.75" in length. |
38.58 |
|
|
Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped left hand end |
|
3G8298 |
HOT CUPPED END BIT LH |
bit that is 1" thick, 10.375" wide and 15.75" in length. |
38.58 |
|
|
Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand |
|
3G8299 |
HOT CUPPED END BIT RH |
end bit that is 1.25" thick, 13" wide and 21.625" in length. |
75.99 |
|
|
Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end |
|
3G8300 |
HOT CUPPED END BIT LH |
bit that is 1.25" thick, 13" wide and 21.625" in length. |
75.99 |
|
|
Caterpillar style right hand end bit that is 19 7/8" long, 10" wide and 1 1/8" thick; takes 9 - |
|
3G8301 |
RH END BIT |
100x400 plow bolts and 9 - 100 hex nuts |
57.54 |
|
|
Caterpillar style left hand end bit that is 19 7/8" long, 10" wide and 1 1/8" thick; takes 9 - 100x400 |
|
3G8302 |
LH END BIT |
plow bolts and 9 - 100 hex nuts |
57.54 |
|
|
Caterpillar style bolt on end bit for a D7 Caterpillar Bulldozer. This is a hot cupped right hand end |
|
3G8315 |
HOT CUPPED END BIT RH |
bit that is 1.25" thick, 13.125" wide and 21.625" in length. |
64.15 |
|
|
Caterpillar style bolt on end bit for a D7 Caterpillar Bulldozer. This is a hot cupped left hand end |
|
3G8316 |
HOT CUPPED END BIT LH |
bit that is 1.25" thick, 13.125" wide and 21.625" in length. |
64.15 |
|
|
Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand |
|
3G8317 |
HOT CUPPED END BIT RH |
end bit that is 1.25" thick, 13" wide and 21.625" in length. |
75.99 |
|
|
Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end |
|
3G8318 |
HOT CUPPED END BIT LH |
bit that is 1.25" thick, 13" wide and 21.625" in length. |
75.99 |
|
|
Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped right hand end |
|
3G8319 |
HOT CUPPED END BIT RH |
bit that is 1" thick, 10.25" wide and 17.625" in length. |
39.68 |
|
|
Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped left hand end |
|
3G8320 |
HOT CUPPED END BIT LH |
bit that is 1" thick, 10.25" wide and 17.625" in length. |
39.68 |
|
|
Caterpillar style bolt on end bit for a D4 Caterpillar Bulldozers. This is a hot cupped right hand |
|
3G8321 |
HOT CUPPED END BIT RH |
end bit that is 1" thick, 10" wide and 17.5" in length. |
38.58 |
Item # |
Item Name |
Description |
Wt. (lb.) |
|
|
Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozer. This is a hot cupped left hand end |
|
2C2302 |
HOT CUPPED END BIT LH |
bit that is 2" thick, 16" wide and 24" in length. |
155.00 |
|
|
Caterpillar style bolt on end bit for a Caterpillar Wheel Dozer/Compactor. This is a hot cupped |
|
2C2328 |
HOT CUPPED END BIT RH |
right hand end bit that is 1" thick, 10.3" wide and 15.44" in length. |
36.00 |
2C2384 |
LH END BIT |
Caterpillar style left hand end bit, 7/8" bolt holes; Use Item # 4J8844LH |
74.96 |
2C2385 |
RH END BIT |
Caterpillar style right hand end bit, 7/8" bolt holes; Use Item # 4J8843RH |
74.96 |
2J2571 |
RH END BIT |
Caterpillar style right hand end bit, 7/8" bolt holes; Use Item # 4J8843 |
74.96 |
2J2572 |
LH END BIT |
Caterpillar style left hand end bit, 7/8" bolt holes; Use Item # 4J8844 |
74.96 |
|
|
Caterpillar style bolt on right hand or left hand grader end bits for a 112 Caterpillar Grader. This is |
|
3B4757 |
GRADER END BIT |
a grader end bit that is .625" thick, 6" wide and 18.375" in length. |
16.75 |
|
|
Caterpillar style bolt on end bit for a D4 or a D5 Caterpillar Bulldozer. This is a level cut right |
|
3G4285 |
LEVEL CUT END BIT RH OR LH |
hand or left hand end bit that is .75" thick, 8" wide and 16.75" in length. |
26.46 |
|
|
Caterpillar style bolt on end bit. This is a level cut right hand or left hand end bit that is 1.375" |
|
3G6395 |
END BIT RH OR LH |
thick, 8" wide and 20.25" in length. |
56.44 |
|
|
Caterpillar style bolt on end bit. This is a level cut right hand or left hand end bit that is 1" thick, |
|
3G6993 |
END BIT RH OR LH |
6.25" wide and 13.5625" in length. |
22.05 |
|
|
Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand |
|
3G8277 |
HOT CUPPED END BIT RH |
end bit that is 1.625" thick, 13" wide and 22" in length. |
97.99 |
|
|
Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end |
|
3G8278 |
HOT CUPPED END BIT LH |
bit that is 1.625" thick, 13" wide and 22" in length. |
97.99 |
|
|
Caterpillar style bolt on right hand end bit for a D8 Caterpillar Bulldozer. This is a hot cupped right |
|
3G8279 |
HOT CUPPED RH END BIT |
|
98.00 |
|
|
Caterpillar style bolt on left hand end bit for a D8 Caterpillar Bulldozer. This is a hot cupped left |
|
3G8280 |
HOT CUPPED LH END BIT |
|
98.00 |
|
|
Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozers. This is a hot cupped right hand |
|
3G8281 |
HOT CUPPED END BIT RH |
end bit that is 1.625" thick, 16" wide and 27.5" in length. |
153.00 |
|
|
Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozers. This is a hot cupped left hand end |
|
3G8282 |
HOT CUPPED END BIT LH |
bit that is 1.625" thick, 16" wide and 27.5" in length. |
153.00 |
|
|
Caterpillar style right hand end bit that is 23" long, 12 1/8" wide, and 2" thick; takes 9 - 100x400 |
|
3G8283 |
RH END BIT |
plow bolts and 9 - 100 hex nuts; Use Item # 8E4197 |
155.00 |
|
|
Caterpillar style left hand end bit that is 23" long, 12 1/8" wide, and 2" thick; takes 9 - 100x400 |
|
3G8284 |
LH END BIT |
plow bolts and 9 - 100 hex nuts; Use Item # 8E4196 |
155.00 |
|
|
Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand |
|
3G8285 |
HOT CUPPED END BIT RH |
end bit that is 1.625" thick, 13" wide and 21.625" in length. |
105.01 |
|
|
Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end |
|
3G8286 |
HOT CUPPED END BIT LH |
bit that is 1.625" thick, 13" wide and 21.625" in length. |
105.01 |
|
|
Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand |
|
3G8287 |
HOT CUPPED END BIT RH |
end bit that is 1.625" thick, 13" wide and 22" in length. |
105.01 |
|
|
Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end |
|
3G8288 |
HOT CUPPED END BIT LH |
bit that is 1.625" thick, 13" wide and 22" in length. |
105.01 |
|
|
Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozers. This is a hot cupped right hand |
|
3G8289 |
HOT CUPPED END BIT RH |
end bit that is 1.375" thick, 16" wide and 27.5" in length. |
128.00 |
|
|
Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozers. This is a hot cupped left hand end |
|
3G8290 |
HOT CUPPED END BIT LH |
bit that is 1.375" thick, 16" wide and 27.5" in length. |
128.00 |
|
|
Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand |
|
3G8291 |
HOT CUPPED END BIT RH |
end bit that is 1.375" thick, 15.5" wide and 24" in length. |
103.99 |
|
|
Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end |
|
3G8292 |
HOT CUPPED END BIT LH |
bit that is 1.375" thick, 15.5" wide and 24" in length. |
103.99 |
|
|
Caterpillar style bolt on end bit for a D7 Caterpillar Bulldozer. This is a hot cupped right hand end |
|
3G8293 |
HOT CUPPED END BIT RH |
bit that is .875" thick, 13.125" wide and 21.625" in length. |
66.14 |
|
|
Caterpillar style bolt on end bit for a D7 Caterpillar Bulldozer. This is a hot cupped left hand end |
|
3G8294 |
HOT CUPPED END BIT LH |
bit that is .875" thick, 13.125" wide and 21.625" in length. |
66.14 |
|
|
Caterpillar style bolt on end bit for a Caterpillar Wheel Dozer/Compactor. This is a hot cupped |
|
3G8295 |
HOT CUPPED END BIT RH |
right hand end bit that is 1" thick, 10.3" wide and 15.44" in length. |
36.00 |
|
|
Caterpillar style bolt on end bit for a Caterpillar Wheel Dozer/Compactor. This is a hot cupped left |
|
3G8296 |
HOT CUPPED END BIT LH |
hand end bit that is 1" thick, 10.3" wide and 15.44" in length. |
36.00 |
|
|
Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped right hand end |
|
3G8297 |
HOT CUPPED END BIT RH |
bit that is 1" thick, 10.375" wide and 15.75" in length. |
38.58 |
|
|
Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped left hand end |
|
3G8298 |
HOT CUPPED END BIT LH |
bit that is 1" thick, 10.375" wide and 15.75" in length. |
38.58 |
|
|
Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand |
|
3G8299 |
HOT CUPPED END BIT RH |
end bit that is 1.25" thick, 13" wide and 21.625" in length. |
75.99 |
|
|
Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end |
|
3G8300 |
HOT CUPPED END BIT LH |
bit that is 1.25" thick, 13" wide and 21.625" in length. |
75.99 |
|
|
Caterpillar style right hand end bit that is 19 7/8" long, 10" wide and 1 1/8" thick; takes 9 - |
|
3G8301 |
RH END BIT |
100x400 plow bolts and 9 - 100 hex nuts |
57.54 |
|
|
Caterpillar style left hand end bit that is 19 7/8" long, 10" wide and 1 1/8" thick; takes 9 - 100x400 |
|
3G8302 |
LH END BIT |
plow bolts and 9 - 100 hex nuts |
57.54 |
|
|
Caterpillar style bolt on end bit for a D7 Caterpillar Bulldozer. This is a hot cupped right hand end |
|
3G8315 |
HOT CUPPED END BIT RH |
bit that is 1.25" thick, 13.125" wide and 21.625" in length. |
64.15 |
|
|
Caterpillar style bolt on end bit for a D7 Caterpillar Bulldozer. This is a hot cupped left hand end |
|
3G8316 |
HOT CUPPED END BIT LH |
bit that is 1.25" thick, 13.125" wide and 21.625" in length. |
64.15 |
|
|
Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand |
|
3G8317 |
HOT CUPPED END BIT RH |
end bit that is 1.25" thick, 13" wide and 21.625" in length. |
75.99 |
|
|
Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end |
|
3G8318 |
HOT CUPPED END BIT LH |
bit that is 1.25" thick, 13" wide and 21.625" in length. |
75.99 |
|
|
Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped right hand end |
|
3G8319 |
HOT CUPPED END BIT RH |
bit that is 1" thick, 10.25" wide and 17.625" in length. |
39.68 |
|
|
Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped left hand end |
|
3G8320 |
HOT CUPPED END BIT LH |
bit that is 1" thick, 10.25" wide and 17.625" in length. |
39.68 |
|
|
Caterpillar style bolt on end bit for a D4 Caterpillar Bulldozers. This is a hot cupped right hand |
|
3G8321 |
HOT CUPPED END BIT RH |
end bit that is 1" thick, 10" wide and 17.5" in length. |
38.58 |
Item # |
Item Name |
Description |
Wt. (lb.) |
|
|
Caterpillar style bolt on end bit for a D7 Caterpillar Bulldozer. This is a hot cupped left hand end |
|
5J9628 |
HOT CUPPED END BIT LH |
bit that is .875" thick, 13.125" wide and 21.625" in length. |
66.14 |
|
|
Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped right hand end |
|
6J0275 |
HOT CUPPED END BIT RH |
bit that is 1" thick, 10.25" wide and 17.625" in length. |
39.68 |
|
|
Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped left hand end |
|
6J0276 |
HOT CUPPED END BIT LH |
bit that is 1" thick, 10.25" wide and 17.625" in length. |
39.68 |
|
|
Caterpillar style bolt on end bit for a D4 Caterpillar Bulldozers. This is a hot cupped right hand |
|
6J0277 |
HOT CUPPED END BIT RH |
end bit that is 1" thick, 10" wide and 17.5" in length. |
38.58 |
|
|
Caterpillar style bolt on end bit for a D4 Caterpillar Bulldozers. This is a hot cupped left hand end |
|
6J0278 |
HOT CUPPED END BIT LH |
bit that is 1" thick, 10" wide and 17.5" in length. |
38.58 |
|
|
Caterpillar style bolt on end bit for a Caterpillar Wheel Dozer/Compactor. This is a hot cupped |
|
6J0893 |
HOT CUPPED END BIT RH |
right hand end bit that is 1" thick, 10.3" wide and 15.44" in length. |
36.00 |
|
|
Caterpillar style bolt on end bit for a Caterpillar Wheel Dozer/Compactor. This is a hot cupped left |
|
6J0894 |
HOT CUPPED END BIT LH |
hand end bit that is 1" thick, 10.3" wide and 15.44" in length. |
36.00 |
|
|
Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped right hand end |
|
6J0895 |
HOT CUPPED END BIT RH |
bit that is 1" thick, 10.375" wide and 15.75" in length. |
38.58 |
|
|
Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped left hand end |
|
6J0896 |
HOT CUPPED END BIT LH |
bit that is 1" thick, 10.375" wide and 15.75" in length. |
38.58 |
|
|
Caterpillar style bolt on right hand level cut end bit for a D8 Bulldozer. This is a level cut end bit |
|
6Y4277 |
RH END BIT |
that is 1.5" thick, 13" wide and 23.3" in length. |
107.70 |
|
|
Caterpillar style bolt on left hand level cut end bit for a D8 Bulldozer. This is a level cut end bit |
|
6Y4278 |
LH END BIT |
that is 1.5" thick, 13" wide and 23.3" in length. |
107.70 |
|
|
Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped left hand end |
|
6Y4410 |
HOT CUPPED END BIT LH |
bit that is 1.25" thick, 12" wide and 19.5" in length. |
59.52 |
|
|
Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped right hand end |
|
6Y4411 |
HOT CUPPED END BIT RH |
bit that is 1.25" thick, 12" wide and 19.5" in length. |
59.52 |
|
|
Caterpillar style bolt on end bit for a D3, D4 and D5 Caterpillar Bulldozers. This is an angled right |
|
6Y5839 |
ANGLED END BIT RH |
hand end bit that is .63" thick, 6.5" wide and 13.88" in length. |
13.45 |
|
|
Caterpillar style bolt on end bit for a D3, D4 and D5 Caterpillar Bulldozers. This is an angled left |
|
6Y5840 |
ANGLED END BIT LH |
hand end bit that is .63" thick, 6.5" wide and 13.88" in length. |
13.45 |
|
|
Caterpillar style bolt on right hand or left hand grader end bits for a 112 Caterpillar Grader. This is |
|
7D2052 |
GRADER END BIT |
a grader end bit that is .625" thick, 6" wide and 18.375" in length. |
16.75 |
|
|
Caterpillar style right hand end bit that is 23" long, 12 1/8" wide, and 2" thick; takes 9 - 100x400 |
|
7J3463 |
RH END BIT |
plow bolts and 9 - 100 hex nuts; Use Item # 8E4197 |
155.00 |
|
|
Caterpillar style left hand end bit that is 23" long, 12 1/8" wide, and 2" thick; takes 9 - 100x400 |
|
7J3464 |
LH END BIT |
plow bolts and 9 - 100 hex nuts; Use Item # 8E4196 |
155.00 |
|
|
Caterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped left hand end |
|
7T4096 |
HOT CUPPED END BIT LH |
bit that is 2 1/4" thick, 19" wide and 29" in length. |
280.00 |
|
|
Caterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped right hand |
|
7T4097 |
HOT CUPPED END BIT RH |
end bit that is 2 1/4" thick, 19" wide and 29" in length. |
280.00 |
|
|
Caterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped right hand |
|
7T4687 |
HOT CUPPED END BIT RH |
end bit that is 2" thick, 19" wide and 29" in length. |
255.00 |
|
|
Caterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped left hand end |
|
7T4688 |
HOT CUPPED END BIT LH |
bit that is 2" thick, 19" wide and 29" in length. |
255.00 |
7T6587 |
RH END BIT |
Caterpillar style right hand end bit, 7/8" bolt holes; Use Item # 4J8843 |
74.96 |
7T6588 |
LH END BIT |
Caterpillar style left hand end bit, 7/8" bolt holes; Use Item # 4J8844 |
74.96 |
|
|
Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozer. This is a hot cupped right hand end |
|
7T9089 |
HOT CUPPED END BIT RH |
bit that is 1.625" thick, 15.875" wide and 23.5" in length. |
127.87 |
|
|
Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozer. This is a hot cupped left hand end |
|
7T9090 |
HOT CUPPED END BIT LH |
bit that is 1.625" thick, 15.875" wide and 23.5" in length. |
127.87 |
|
|
Caterpillar style left hand end bit that takes 7 - 100x325 plow bolts and 7 - 100 hex nuts; Use Item |
|
7T9092 |
LH END BIT |
# 8E4538 |
164.00 |
|
|
Caterpillar style right hand end bit that takes 7 - 100x325 plow bolts and 7 - 100 hex nuts; Use |
|
7T9093 |
RH END BIT |
Item # 8E4537 |
164.00 |
|
|
Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozer. This is a hot cupped right hand end |
|
8E4193 |
HOT CUPPED END BIT RH |
bit that is 1.625" thick, 15.875" wide and 23.5" in length. |
127.87 |
|
|
Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozer. This is a hot cupped left hand end |
|
8E4194 |
HOT CUPPED END BIT LH |
bit that is 1.625" thick, 15.875" wide and 23.5" in length. |
127.87 |
|
|
Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozer. This is a hot cupped left hand end |
|
8E4196 |
HOT CUPPED END BIT LH |
bit that is 2" thick, 16" wide and 24" in length. |
155.00 |
|
|
Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozer. This is a hot cupped right hand end |
|
8E4197 |
HOT CUPPED END BIT RH |
bit that is 2" thick, 16" wide and 24" in length. |
155.00 |
|
|
Caterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped left hand end |
|
8E4198 |
HOT CUPPED END BIT LH |
bit that is 2" thick, 19" wide and 29" in length. |
255.00 |
|
|
Caterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped right hand |
|
8E4199 |
HOT CUPPED END BIT RH |
end bit that is 2" thick, 19" wide and 29" in length. |
255.00 |
|
|
Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand |
|
8E4537 |
HOT CUPPED END BIT RH |
end bit that is 2" thick, 15.875" wide and 23.5" in length. |
169.00 |
|
|
Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end |
|
8E4538 |
HOT CUPPED END BIT LH |
bit that is 2" thick, 15.875" wide and 23.5" in length. |
169.00 |
8E4539 |
RH END BIT |
Caterpillar style right hand end bit for D8-9 doziers |
158.00 |
8E4540 |
LH END BIT |
Caterpillar style left hand end bit for D8-9 doziers |
158.00 |
|
|
Caterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped right hand |
|
8E4541 |
HOT CUPPED END BIT RH |
end bit that is 2 1/4" thick, 19" wide and 29" in length. |
280.00 |
8E4541HDR |
RH END BIT |
Caterpillar style right hand ribbed end bit, takes 7 - 125 X 400 plow bolts and 7 - 125 hex nuts |
285.00 |
|
|
Caterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped left hand end |
|
8E4542 |
HOT CUPPED END BIT LH |
bit that is 2 1/4" thick, 19" wide and 29" in length. |
280.00 |
8E4542HDL |
LH END BIT |
Caterpillar style left hand ribbed end bit, takes 7 - 125 X 400 plow bolts and 7 - 125 hex nuts |
285.00 |
|
|
Caterpillar style right hand end bit for a D10 or a D11 that is 32 3/8" long, 16 1/4" wide, and 2" |
|
8E4545 |
RH END BIT |
thick; takes 9 - 125 X 400 plow bolts and 9 - 125 hex nuts |
259.00 |
|
|
Caterpillar style left hand end bit for a D10 or a D11 that is 32 3/8" long, 16 1/4" wide, and 2" |
|
8E4546 |
LH END BIT |
thick; takes 9 - 125 X 400 plow bolts and 9 - 125 hex nuts |
259.00 |
Item # |
Item Name |
Description |
Wt. (lb.) |
|
|
Caterpillar style bolt on right hand or left hand grader end bits for a 14G Caterpillar Grader. This |
|
8E5529 |
END BIT |
is a grader end bit that is .625" thick, 6" wide and 18.25" in length. |
18.00 |
|
|
Caterpillar style bolt on right hand or left hand grader end bits for a 16G Caterpillar Grader. This |
|
8E5530 |
END BIT |
|
18.00 |
|
|
Caterpillar style bolt on right hand or left hand grader end bits for a 12G Caterpillar Grader. This |
|
8E5531 |
GRADER END BIT RH/LH |
is a grader end bit that is .625" thick, 6" wide and 18.375" in length. |
16.76 |
|
|
Caterpillar style bolt on level cut end RH end bit for a D5 Caterpillar Bulldozer. This is .75" thick, |
|
|
|
8" wide and 17.875" in length. It takes 4 of a 3/4" X 2 3/4" (750X275) plow bolt and 4 of a 3/4" |
|
8E7078 |
LEVEL CUT END BIT RH |
(750 HEX NUT) hex nut. |
26.00 |
|
|
Caterpillar style bolt on level cut end LH end bit for a D5 Caterpillar Bulldozer. This is .75" thick, |
|
8E7079 |
LEVEL CUT END BIT LH |
8" wide and 17.875" in length. |
26.00 |
|
|
Caterpillar style bolt on end bit for a D5 Caterpillar Bulldozer. This is a level cut left hand end bit |
|
8E9378 |
LEVEL CUT END BIT LH |
that is 1" thick, 8" wide and 18.50" in length. |
36.16 |
|
|
Caterpillar style bolt on end bit for a D5 Caterpillar Bulldozer. This is a level cut right hand end bit |
|
8E9379 |
LEVEL CUT END BIT RH |
that is 1" thick, 8" wide and 18.50" in length. |
36.16 |
|
|
Caterpillar style bolt on end bit for a D3 Caterpillar Bulldozer. This is a level cut right hand or left |
|
8J6412 |
LEVEL CUT END BIT RH OR LH |
hand end bit that is .75" thick, 6.5" wide and 13" in length. |
15.87 |
|
|
Caterpillar style left hand end bit that is 19 7/8" long, 10" wide and 1 1/8" thick; takes 9 - 100x400 |
|
8J8116 |
LH END BIT |
plow bolts and 9 - 100 hex nuts; Use Item # 3G8302 |
57.54 |
|
|
Caterpillar style right hand end bit that is 19 7/8" long, 10" wide and 1 1/8" thick; takes 9 - |
|
8J8117 |
RH END BIT |
100x400 plow bolts and 9 - 100 hex nuts; Use Item # 3G8301 |
57.54 |
|
|
Caterpillar style right hand end bit that is 18 7/8" long, 10" wide, and 1 1/8" thick; takes 9 - |
|
9J1477 |
RH END BIT |
100x300 plow bolts and 9 - 100 hex nuts |
57.31 |
|
|
Caterpillar style left hand end bit that is 18 7/8" long. 10" wide, and 1 1/8" thick; takes 9 - 100x300 |
|
9J1478 |
LH END BIT |
plow bolts and 9 - 100 hex nuts |
57.31 |
|
|
Caterpillar style bolt on right hand or left hand grader end bits for a 12G Caterpillar Grader. This |
|
9W1764 |
GRADER END BIT RH/LH |
is a grader end bit that is .625" thick, 6" wide and 18.375" in length. |
16.76 |
|
|
Caterpillar style right hand end bit that is 18 1/4" long, 8 1/2" wide and 1 1/8" thick; takes 8 - |
|
9W1875 |
RH END BIT |
750x300 plow bolts and 8 - 750 hex nuts |
56.44 |
|
|
Caterpillar style left hand end bit that is 18 1/4" long, 8 1/2" wide and 1 1/8" thick; takes 8 - |
|
9W1876 |
LH END BIT |
750x300 plow bolts and 8 - 750 hex nuts |
56.44 |
|
|
Caterpillar style right hand end bit for a D10 or a D11 that is 32 3/8" long, 16 1/4" wide, and 2" |
|
9W4491 |
RH END BIT |
thick; takes 9 - 125 X 400 plow bolts and 9 - 125 hex nuts; Use Item # 8E4545 |
259.00 |
|
|
Caterpillar style left hand end bit for a D10 or a D11 that is 32 3/8" long, 16 1/4" wide, and 2" |
|
9W4492 |
LH END BIT |
thick; takes 9 - 125 X 400 plow bolts and 9 - 125 hex nuts; Use Item # 8E4546 |
259.00 |
|
|
Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozer. This is a hot cupped right hand end |
|
9W6192 |
HOT CUPPED END BIT RH |
bit that is 2" thick, 16" wide and 24" in length. |
155.00 |
|
|
Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozer. This is a hot cupped left hand end |
|
9W6193 |
HOT CUPPED END BIT LH |
bit that is 2" thick, 16" wide and 24" in length. |
155.00 |
9W6194 |
LH END BIT |
Caterpillar style left hand end bit for D8-9 doziers; Use Item # 8E4540 |
158.00 |
9W6195 |
RH END BIT |
Caterpillar style right hand end bit for D8-9 doziers; Use Item # 8E4539 |
158.00 |
|
|
Caterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped right hand |
|
9W6196 |
HOT CUPPED END BIT RH |
end bit that is 2" thick, 19" wide and 29" in length. |
255.00 |
|
|
Caterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped left hand end |
|
9W6197 |
HOT CUPPED END BIT LH |
bit that is 2" thick, 19" wide and 29" in length. |
255.00 |
|
|
Caterpillar style bolt on end bit for a D7 Caterpillar Bulldozers. This is a hot cupped left hand end |
|
9W6198 |
HOT CUPPED END BIT LH |
bit that is 1 3/8" thick, 13" wide and 24" in length. |
111.33 |
|
|
Caterpillar style bolt on end bit for a D7 Caterpillar Bulldozers. This is a hot cupped right hand |
|
9W6199 |
HOT CUPPED END BIT RH |
end bit that is 1 3/8" thick, 13" wide and 24" in length. |
111.33 |
|
|
Caterpillar style bolt on end bit for a D5 Caterpillar Bulldozer. This is a level cut right hand end bit |
|
9W8874 |
LEVEL CUT END BIT RH |
that is 1" thick, 10" wide and 18.375" in length. |
44.09 |
|
|
Caterpillar style bolt on end bit for a D5 Caterpillar Bulldozer. This is a level cut left hand end bit |
|
9W8875 |
LEVEL CUT END BIT LH |
that is 1" thick, 10" wide and 18.375" in length. |
44.09 |
Caterpillar Style Grader Blades |
|
|
138-6440 |
GRADER BLADE |
|
360.00 |
|
|
Caterpillar style bolt on right hand grader overlay for a 120 Caterpillar Grader. This is a double |
|
4D5757 |
RH GRADER OVERLAY |
beveled reversible bucket overlay blade that is .625" thick, 9" wide and 18.875" in length. |
30.86 |
|
|
Caterpillar style bolt on left hand grader overlay for a 120 Caterpillar Grader. This is a double |
|
4D5758 |
LH GRADER OVERLAY |
beveled reversible bucket overlay blade that is .625" thick, 9" wide and 18.875" in length. |
30.86 |
|
|
Caterpillar style 5/8" x 8" x 7' curved, heat treated, 15 hole grader blade; takes 15 - 5/8" x 2 3/4" |
|
4D9922 |
GRADER BLADE |
plow bolts and 15 - 5/8" hex nuts; Use Item # 5D-9561 |
107.58 |
|
|
Caterpillar style 1" X 8" X 6" curved, heat treated, 13 hole grader blade; takes 13 of a 3/4" X 2 |
|
4T2231 |
CURVED GRADER BLADE |
3/4"(750X275) plow bolt and 13 of a 3/4"(750 HEX NUT) hex nut. |
153.00 |
|
|
Caterpillar style 1" X 8" X 7" curved, heat treated, 15 hole grader blade; takes 15 of a 3/4" X 2 |
|
4T2233 |
CURVED GRADER BLADE |
3/4"(750X275) plow bolt and 15 of a 3/4"(750 HEX NUT) hex nut. |
175.00 |
|
|
Caterpillar style 1" X 8" X 8" curved, heat treated, 17 hole grader blade; takes 17 of a 3/4" X 2 |
|
4T2236 |
CURVED GRADER BLADE |
3/4"(750X275) plow bolt and 17 of a 3/4"(750 HEX NUT) hex nut. |
196.00 |
|
|
Caterpillar style 1" X 8" X 7" curved, heat treated, 15 hole grader blade; takes 15 of a 5/8" X 2 |
|
4T2242 |
CURVED GRADER BLADE |
3/4"(625X275) plow bolt and 15 of a 5/8"(625 HEX NUT) hex nut. |
179.00 |
|
|
Caterpillar style 1" X 8" X 6" flat, heat treated, 13 hole grader blade; takes 13 of a 5/8" X 2 |
|
4T2243 |
GRADER BLADE |
3/4"(625X275) plow bolt and 13 of a 5/8"(625 HEX NUT) hex nut. Use Item # 7T3499 |
153.00 |
|
|
Caterpillar style 1" X 8" X 6" curved, heat treated, 13 hole grader blade; takes 13 of a 5/8" X 2 |
|
4T2244 |
GRADER BLADE |
3/4"(625X275) plow bolt and 13 of a 5/8"(625 HEX NUT) hex nut. |
155.00 |
|
|
Caterpillar style 3/4" X 8" X 6" flat, heat treated, 13 hole grader blade; takes 13 of a 5/8" X 2 |
|
4T3007 |
GRADER BLADE |
1/4"(625X225) plow bolt and 13 of a 5/8"(625 HEX NUT) hex nut. |
112.44 |
|
|
Caterpillar style 3/4" X 8" X 7" flat, heat treated, 15 hole grader blade; takes 15 of a 3/4" X 2 |
|
4T3032 |
GRADER BLADE |
3/4"(750X275) plow bolt and 15 of a 3/4"(750 HEX NUT) hex nut. |
132.28 |
|
|
Caterpillar style 3/4" X 8" X 7" flat, heat treated, 15 hole grader blade; takes 15 of a 5/8" X 2 |
|
4T3036 |
GRADER BLADE |
1/4"(625X225) plow bolt and 15 of a 5/8"(625 HEX NUT) hex nut. |
132.28 |
Item # |
Item Name |
Description |
Wt. (lb.) |
|
|
Caterpillar style 3/4" X 8" X 8" flat, heat treated, 17 hole grader blade; takes 17 of a 3/4" X 2 |
|
4T3037 |
FLAT GRADER BLADE |
3/4"(750X275) plow bolt and 17 of a 3/4"(750 HEX NUT) hex nut. |
132.28 |
|
|
Caterpillar style 1" X 10" X 96" flat, heat treated, 17 hole grader blade; takes 17 of a 3/4" X 2 |
|
4T6511 |
FLAT GRADER BLADE |
3/4"(750X275) plow bolt and 17 of a 3/4"(750 HEX NUT) hex nut. |
248.00 |
|
|
Caterpillar style 1.375" X 10" X 95.813" flat, heat treated, 17 hole grader blade; takes 17 of a 3/4" |
|
4T8317 |
FLAT GRADER BLADE |
X 2 3/4"(750X275) plow bolt and 17 of a 3/4"(750 HEX NUT) hex nut. |
354.00 |
|
|
Caterpillar style 5/8" x 6" x 6' curved, heat treated, 13 hole grader blade; takes 13 - 5/8" x 2 3/4" |
|
5D-9553 |
GRADER BLADE |
plow bolts and 13 - 5/8" hex nuts |
66.13 |
|
|
Caterpillar style 5/8" x 6" x 7' curved, heat treated, 15 hole grader blade; takes 15 - 5/8" x 2 3/4" |
|
5D-9554 |
GRADER BLADE |
plow bolts and 15 - 5/8" hex nuts |
78.26 |
|
|
Caterpillar style .75" X 6" X 7" curved, heat treated, 15 hole grader blade; takes 15 of a 3/4" X 2 |
|
5D-9557 |
GRADER BLADE |
1/4"(750X225) plow bolt and 15 of a 3/4"(750 HEX NUT) hex nut. |
91.01 |
|
|
Caterpillar style 3/4" x 8" x 6' curved, heat treated, 13 hole grader blade; takes 13 - 3/4" x 2 3/4" |
|
5D-9558 |
GRADER BLADE |
plow bolts and 13 - 3/4" hex nuts |
112.43 |
|
|
Caterpillar style 3/4" x 8" x 7' curved, heat treated, 15 hole grader blade; takes 15 - 5/8" x 2 3/4" |
|
5D-9559 |
GRADER BLADE |
plow bolts and 15 - 625 hex nuts |
131.17 |
|
|
Caterpillar style 5/8" x 8" x 7' curved, heat treated, 15 hole grader blade; takes 15 - 5/8" x 2 3/4" |
|
5D-9561 |
GRADER BLADE |
plow bolts and 15 - 5/8" hex nuts |
107.58 |
|
|
Caterpillar style .625" X 8" X 6" curved, heat treated, 13 hole grader blade; takes 13 of a 5/8" X 2 |
|
5D-9562 |
GRADER BLADE |
1/4"(625X225) plow bolt and 13 of a 5/8"(625 HEX NUT) hex nut. |
91.01 |
|
|
Caterpillar style 3/4" x 6" x 7' curved, heat treated, 15 hole grader blade; takes 15 - 5/8" x 2 3/4" |
|
5D9557 |
GRADER BLADE |
plow bolts and 15 - 625 hex nuts |
92.00 |
|
|
Caterpillar style grader blade for a Caterpillar Motor Grader. This is a curved grader blade that is |
|
5D-9732 |
GRADER BLADE |
|
146.00 |
|
|
Caterpillar style 3/4" X 8" X 6" flat, heat treated, 13 hole grader blade; takes 13 of a 5/8" X 2 |
|
5J6970 |
GRADER BLADE |
1/4"(625X225) plow bolt and 13 of a 5/8"(625 HEX NUT) hex nut. Use Item # 4T3007 |
112.44 |
|
|
Caterpillar style 3/4" X 8" X 7" flat, heat treated, 15 hole grader blade; takes 15 of a 5/8" X 2 |
|
5J6973 |
GRADER BLADE |
1/4"(625X225) plow bolt and 15 of a 5/8"(625 HEX NUT) hex nut. Use Item # 4T3036 |
132.28 |
|
|
Caterpillar style 3/4" X 8" X 7" flat, heat treated, 15 hole grader blade; takes 15 of a 3/4" X 2 |
|
6J2377 |
GRADER BLADE |
3/4"(750X275) plow bolt and 15 of a 3/4"(750 HEX NUT) hex nut. Use Item # 4T3032 |
132.28 |
|
|
Caterpillar style bolt on left hand or right hand grader overlay for a 14G Caterpillar Grader. This is |
|
6Y2805 |
LH/RH GRADER OVERLAY |
length. |
|
|
|
Caterpillar style 5/8" X 8" X 7" curved, heat treated, 15 hole grader blade; takes 15 of a 3/4" X 2 |
|
7D1158 |
GRADER BLADE |
3/4"(750X275) plow bolt and 15 of a 3/4"(750 HEX NUT) hex nut. |
108.91 |
7D1576 |
GRADER BLADE |
|
111.00 |
|
|
Caterpillar style 3/4" X 8" X 7" curved, heat treated, 15 hole grader blade; takes 15 of a 3/4" X 2 |
|
7D1577 |
GRADER BLADE |
3/4"(750X275) plow bolt and 15 of a 3/4"(750 HEX NUT) hex nut. |
132.28 |
|
|
Caterpillar style 3/4" X 8" X 8" curved, heat treated, 17 hole grader blade; takes 17 of a 3/4" X 2 |
|
7D1949 |
CURVED GRADER BLADE |
3/4"(750X275) plow bolt and 17 of a 3/4"(750 HEX NUT) hex nut. |
139.99 |
7D4508 |
GRADER BLADE |
|
54.00 |
|
|
Caterpillar style bolt on right hand or left hand grader overlay for a 14G Caterpillar Grader. This is |
|
|
|
a double beveled reversible bucket overlay blade that is .625" thick, 9.25" wide and 23.375" in |
|
7D9999 |
GRADER OVERLAY |
length. |
35.27 |
|
|
Caterpillar style 3/4" x 8" x 7' curved, carbon, 15 hole grader blade; takes 15 - 3/4" x 2 3/4" plow |
|
7T-1623 |
GRADER BLADE |
bolts and 15 - 3/4" hex nuts |
132.28 |
|
|
Caterpillar style grader blade for a Caterpillar Motor Grader. This is a curved grader blade that is |
|
7T-1631 |
GRADER BLADE |
|
122.00 |
|
|
Caterpillar style 5/8" x 6" x 8' curved, carbon, 17 hole grader blade; takes 17 - 5/8" x 2 3/4" plow |
|
7T-1632 |
GRADER BLADE |
bolts and 17 - 5/8" hex nuts |
91.05 |
|
|
Caterpillar style 5/8" x 6" x 6' curved, carbon, 13 hole grader blade; takes 13 - 5/8" x 2 3/4" plow |
|
7T-1633 |
GRADER BLADE |
bolts and 13 - 5/8" hex nuts |
65.47 |
|
|
Caterpillar style 3/4" x 8" x 6' curved, carbon, 13 hole grader blade; takes 13 - 3/4" x 2 3/4" plow |
|
7T-1634 |
GRADER BLADE |
bolts and 13 - 3/4" hex nuts |
113.09 |
|
|
Caterpillar style grader blade for a Caterpillar Motor Grader. This is a curved grader blade that is |
|
7T-1637 |
GRADER BLADE |
|
64.40 |
|
|
Caterpillar style 5/8" x 8" x 7' curved, carbon, 15 hole grader blade; takes 15 - 5/8" x 2 3/4" plow |
|
7T-1643 |
GRADER BLADE |
bolts and 15 - 5/8" hex nuts |
108.24 |
|
|
Caterpillar style 5/8" x 6" x 7' curved, carbon, 15 hole grader blade; takes 15 - 5/8" x 2 3/4" plow |
|
7T-1645 |
GRADER BLADE |
bolts and 15 - 5/8" hex nuts |
79.59 |
7T3498 |
GRADER BLADE |
|
178.00 |
|
|
Caterpillar style 1" X 8" X 6" flat, heat treated, 13 hole grader blade; takes 13 of a 5/8" X 2 |
|
7T3499 |
GRADER BLADE |
3/4"(625X275) plow bolt and 13 of a 5/8"(625 HEX NUT) hex nut. |
153.00 |
8D2786 |
GRADER BLADE |
|
52.00 |
|
|
Caterpillar style 1/2" x 6" x 7' curved, heat treated, 15 hole grader blade; takes 15 - 5/8" x 2 3/4" |
|
8D-2787 |
GRADER BLADE |
plow bolts and 15 - 5/8" hex nuts |
62.16 |
|
|
Caterpillar style 5/8" x 6" x 8' curved, heat treated, 17 hole grader blade; takes 17 - 5/8" x 2 3/4" |
|
8J-4043 |
GRADER BLADE |
plow bolts and 17 - 5/8" hex nuts |
91.05 |
|
|
Caterpillar style grader blade for a Caterpillar Motor Grader. This is a curved grader blade that is |
|
8J9821 |
GRADER BLADE |
|
122.00 |
|
|
Caterpillar style .625" X 6" X 6" curved, heat treated, 13 hole grader blade; takes 13 of a 3/4" X 2 |
|
9J3657 |
CURVED GRADER BLADE |
1/4"(750X225) plow bolt and 13 of a 3/4"(750 HEX NUT) hex nut. |
64.99 |
|
|
Caterpillar style 5/8" X 6" X 7" curved, heat treated, 15 hole grader blade; takes 15 of a 3/4" X 2 |
|
9J3658 |
CURVED GRADER BLADE |
3/4"(750X275) plow bolt and 15 of a 3/4"(750 HEX NUT) hex nut. |
73.39 |
|
|
Caterpillar style bolt on right hand grader end bit for a 14G Caterpillar Grader. This is a grader |
|
9J4405 |
RH END BIT |
|
18.08 |
|
|
Caterpillar style bolt on left hand grader end bit for a 14G Caterpillar Grader. This is a grader end |
|
9J4406 |
LH END BIT |
|
18.08 |
Item # |
Item Name |
Description |
Wt. (lb.) |
|
|
Caterpillar style grader blade for a Caterpillar Motor Grader. This is a curved grader blade that is |
|
9J7701 |
GRADER BLADE |
|
92.00 |
|
|
Caterpillar style 1/2" x 6" x 7' curved, carbon, 15 hole grader blade; takes 15 - 5/8" x 2 3/4" plow |
|
9W-2299 |
GRADER BLADE |
bolts and 15 - 5/8" hex nuts |
61.65 |
|
|
Caterpillar style bolt on left hand and right hand grader overlay for a 140 Caterpillar Grader. This |
|
|
|
is a double beveled reversible bucket overlay blade that is .625" thick, 9.25" wide and 18.625" in |
|
9W1767 |
LH/RH GRADER OVERLAY |
length. |
28.99 |
|
|
Caterpillar style bolt on left hand or right hand grader overlay for a 12G Caterpillar Grader. This is |
|
9W1768 |
LH/RH GRADER OVERLAY |
length. |
34.00 |
T74753 |
GRADER BLADE |
|
65.00 |
Caterpillar Style Guards & Protectors |
|
|
112-2489 |
PROTECTOR |
Caterpillar style vertical shroud protector, takes 2 - 112-2490 pins and 2 - 8E5559 retainers |
37.92 |
|
|
Caterpillar style vertical shroud protector with a 3" opening, it is 40" long and has a 24" bolt hole |
|
125-0800 |
PROTECTOR |
spacing, center to center; takes 2 - 8E4708 pins and 2 - 4T4707 retainers |
126.77 |
132-1014 |
EXTENDED GUARD |
Caterpillar style extended ripper guard; takes 2 - 6Y3909 pins and 2 - 4T4707 retainers |
172.00 |
132-1015 |
PROTECTOR |
Caterpillar style protector; takes 2 - 6Y3909 pins and 2 - 4T4707 retainers |
177.00 |
132-4716EXT |
RIPPER GUARD |
Caterpillar style ripper guard; takes 2 - 6Y3394 pins and 2 - 8E4743 retainers |
52.56 |
|
|
Caterpillar style protector for a 980G with a 9 1/2" bolt hole spacing; it is 18 1/4" long and is for a |
|
135-8246 |
PROTECTOR |
1 1/8" lip thickness; takes a 135-9292 pin and an 8E6359 sleeved retainer |
23.31 |
|
|
Caterpillar style right hand corner protector for a J250 series, takes 2 - 100x300 plow bolts and 2 - |
|
173-5422 |
RH CORNER PROTECTOR |
100 hex nuts; Use Item #253-0060 |
21.90 |
|
|
Caterpillar style left hand corner protector for a J250 series, takes 2 - 100x300 plow bolts and 2 - |
|
173-5423 |
LH CORNER PROTECTOR |
100 hex nuts; Use Item # 253-0061 |
21.90 |
|
|
Caterpillar style right hand corner protector for a J300 series, takes 2 - 125x375 plow bolts and 2 - |
|
173-5424 |
RH CORNER PROTECTOR |
125 hex nuts; Use Item # 253-0062 |
29.10 |
|
|
Caterpillar style left hand corner protector for a J300 series, takes 2 - 125x375 plow bolts and 2 - |
|
173-5425 |
LH CORNER PROTECTOR |
125 hex nuts; Use Item # 253-0063 |
29.10 |
|
|
Caterpillar style right hand corner protector for a J350 series, takes 2 - 125x375 plow bolts and 2 - |
|
173-5426 |
RH CORNER PROTECTOR |
125 hex nuts; Use Item # 253-0064 |
36.30 |
|
|
Caterpillar style left hand corner protector for a J350 series, takes 2 - 125x375 plow bolts and 2 - |
|
173-5427 |
LH CORNER PROTECTOR |
125 hex nuts; Use Item # 253-0065 |
36.30 |
|
|
Caterpillar style right hand, heavy duty, corner protector for a J400-J460 series, takes 2 - 125 x |
|
173-5428 |
RH CORNER PROTECTOR |
400 plow bolts and 2 - 125 hex nuts; Use Item # 253-0066 |
64.70 |
|
|
Caterpillar style left hand, heavy duty, corner protector for a J400-J460 series, takes 2 - 125 x 400 |
|
173-5429 |
LH CORNER PROTECTOR |
plow bolts and 2 - 125 hex nuts; Use Item # 253-0067 |
64.70 |
|
|
Caterpillar style guard with a 2 1/2" opening and is 23" long, takes 2 - 1U0739 pins and 2 - |
|
1U0740 |
GUARD |
8E5559 sleeved retainers |
51.15 |
1U3644 |
GUARD |
Caterpillar style ripper guard; takes a 6Y3909 pin and a 4T4707 retainer |
88.85 |
|
|
Caterpillar style right hand, heavy duty, corner protector for a J250 series, takes 2 - 100 x 300 |
|
253-0060 |
RH CORNER PROTECTOR |
plow bolts and 2 - 100 hex nuts (for 916-943 models) |
21.90 |
|
|
Caterpillar style left hand, heavy duty, corner protector for a J250 series, takes 2 - 100 x 300 plow |
|
253-0061 |
LH CORNER PROTECTOR |
bolts and 2 - 100 hex nuts (for 916-943 models) |
21.90 |
|
|
Caterpillar style right hand, heavy duty, corner protector for a J300 series, takes 2 - 125 x 350 |
|
253-0062 |
RH CORNER PROTECTOR |
plow bolts and 2 - 125 hex nuts (for 950-963 models) |
29.10 |
|
|
Caterpillar style left hand, heavy duty, corner protector for a J300 series, takes 2 - 125 x 350 plow |
|
253-0063 |
LH CORNER PROTECTOR |
bolts and 2 - 125 hex nuts (for 950-963 models) |
29.10 |
|
|
Caterpillar style right hand, heavy duty, corner protector for a J350 series, takes 2 - 125 x 375 |
|
253-0064 |
RH CORNER PROTECTOR |
plow bolts and 2 - 125 hex nuts (for 966-973 models) |
36.30 |
|
|
Caterpillar style left hand, heavy duty, corner protector for a J350 series, takes 2 - 125 x 375 plow |
|
253-0065 |
LH CORNER PROTECTOR |
bolts and 2 - 125 hex nuts (for 966-973 models) |
36.30 |
|
|
Caterpillar style right hand, heavy duty, corner protector for a J400-J460 series, takes 2 - 125 x |
|
253-0066 |
RH CORNER PROTECTOR |
400 plow bolts and 2 - 125 hex nuts (for 980-988 models) |
64.70 |
|
|
Caterpillar style left hand, heavy duty, corner protector for a J400-J460 series, takes 2 - 125 x 400 |
|
253-0067 |
LH CORNER PROTECTOR |
plow bolts and 2 - 125 hex nuts (for 980-988 models) |
64.70 |
6I8310 |
LH CORNER PROTECTOR |
Caterpillar style left hand corner protector for a J300 series |
13.45 |
6I8311 |
RH CORNER PROTECTOR |
Caterpillar style right hand corner protector for a J300 series |
13.45 |
6J8814 |
GUARD |
Caterpillar style ripper guard; takes 2 - 6Y3394 pins and 2 - 8E4743 retainers |
31.09 |
6Y8960 |
GUARD |
Caterpillar style ripper guard; takes 2 - 6Y3909 pins and 2 - 4T4707 retainers |
85.98 |
6Y9704 |
GUARD |
Caterpillar style shank guard |
117.39 |
7J1849 |
GUARD |
Caterpillar style ripper guard; takes 2 - 6Y3394 pins and 2 - 8E4743 retainers; Use Item # 6J8814 |
31.09 |
8E1848 |
RIPPER GUARD |
Caterpillar style ripper guard; takes 2 - 6Y3394 pins and 2 - 8E4743 retainers |
51.81 |
8E1848EXT |
EXTENDED GUARD |
Caterpillar style extended ripper guard, takes 2 - 6Y3909 pins |
57.98 |
|
|
Caterpillar style vertical protector; takes 2 - 8E4708 pins and 2 - 4T4707 retainers; Use Item #125- |
|
8E3414 |
PROTECTOR |
0800 |
126.77 |
|
|
Caterpillar style vertical protector; takes 2 - 8E4708 pins and 2 - 4T4707 retainers; Use Item # |
|
8E3814 |
PROTECTOR |
125-0800 |
126.77 |
8E5300 |
RH CORNER PROTECTOR |
Caterpillar style right hand corner protector for a J300 series |
15.21 |
8E5301 |
LH CORNER PROTECTOR |
Caterpillar style left hand corner protector for a J300 series |
15.21 |
|
|
Caterpillar style protector with a 1 1/2" opening, it is 26" long and has a 14 1/2" bolt hole spacing, |
|
8J4143 |
PROTECTOR |
center to center; takes 2 - 9J8441 pins and 2 - 8E5559 sleeved retainers |
45.08 |
|
|
Caterpillar style side protector with a 1 1/2" opening, it is 23" long and has a 10" bolt hole |
|
9J9600 |
PROTECTOR |
spacing, center to center; takes 2 - 9J8442 pins and 2 - 6Y9459 retainers |
39.68 |
9N4621 |
GUARD |
Caterpillar style ripper guard; takes 2 - 8E2229 pins and 2 - 8E2230 retainers |
174.00 |
9W1820 |
GUARD |
Caterpillar style ripper guard; takes 2 - 8E2229 pins and 2 - 8E2230 retainers; Use Item # 9N4621 |
174.00 |
9W8365 |
GUARD |
Caterpillar style ripper guard; takes 2 - 6Y3909 pins and 2 - 4T4707 retainers |
90.61 |
9W8365EXT |
EXTENDED GUARD |
Caterpillar style extended ripper guard; takes 2 - 6Y3909 pins and 2 - 4T4707 retainers |
103.84 |