Item # |
Item Name |
Description |
Wt. (lb.) |
20Y913A370 |
PLUG |
Esco style plug for a 27 series bucket tooth, takes a 27VPN pin; Use Item #27VPL |
0.11 |
421-847A140 |
PLUG |
Esco style plug for a 27 series bucket tooth, takes a 27VPN pin; Use Item #27VPL |
0.11 |
|
|
Esco style rubber lock for a 25 and a 30 series bucket tooth, takes a 25-30PN pin; Use Item #25- |
|
606037C91 |
LOCK |
30LK |
0.02 |
620833C1 |
LOCK |
Esco style lock for an 18 or a 20 series bucket tooth, takes an 18-20PN pin; Use Item #18-20LK |
0.02 |
668978C1 |
BUSHING |
Esco style bushing for a 35 series, takes a 35RPG pin; Use Item #35RBG |
0.04 |
881900C1 |
LOCK |
Esco style rubber lock for a 50 series bucket tooth, takes a 50PN pin; Use Item #50LK |
0.44 |
883269C1 |
LOCK |
Esco style lock for a 35 and a 40 series bucket tooth; Use Item #35-40LK |
0.11 |
925474C1 |
LOCK |
Esco style lock for a 45 series bucket tooth, takes a 45PN pin; Use Item #45LK |
0.11 |
VK4009 |
LOCK |
Esco style lock for a 35 and a 40 series bucket tooth; Use Item #35-40LK |
0.11 |
|
|
Esco style rubber lock for a 25 and a 30 series bucket tooth, takes a 25-30PN pin; Use Item #25- |
|
VL6116 |
LOCK |
30LK |
0.02 |
Komatsu Style Ripper Shanks |
|
|
|
131-78-31180 |
RIPPER SHANK |
Komatsu style Ripper Shank for a D40, D50 or a D65 Dozer |
132.28 |
141-78-11241 |
RIPPER SHANK |
Komatsu style Ripper Shank for a D60, D65 or a D75 Dozer |
231.48 |
144-78-11245 |
RIPPER SHANK |
Komatsu style Ripper Shank |
232.37 |
|
|
Komatsu style ripper shank for a Komatsu D155A. This ripper is 3" thick, 12.75" wide and 81" |
|
15A-79-11120 |
RIPPER SHANK |
long. |
825.00 |
Komatsu Style Sidecutters |
|
|
|
205-70-74180L |
LH SIDECUTTER |
Komatsu style PC200 left hand sidecutter |
33.07 |
205-70-74190R |
RH SIDECUTTER |
Komatsu style PC200 right hand sidecutter |
33.07 |
Komatsu Style Teeth |
|
|
|
|
|
Komatsu style unitooth with a .59" lip thickness and a 2.16" bolt hole spacing, center to center; |
|
107 |
UNITOOTH |
takes 2 - 1/2" x 2" CS cap screws and 2 - 1/2" CS nuts |
3.40 |
103659C1 |
TIGER TOOTH |
H&L style heavy duty tiger bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230T |
2.51 |
|
|
Yanmar/Komatsu style unitooth, takes 2 - 625x225 plow bolts and 2 - 625 hex nuts; Use Item # |
|
10E-7-22211 |
UNITOOTH |
Y211 |
3.30 |
|
|
Esco style rock chisel bucket tooth for a 47 series, takes a 47LK horseshoe lock or a 47VPN pin |
|
1218749H1 |
ROCK CHISEL TOOTH |
and a 47VPL plug; Use Item #47R |
23.00 |
|
|
Esco style abrasion bucket tooth for a 47 series, takes a 47LK horseshoe lock or a 47VPN pin |
|
1218750H1 |
ABRASION TOOTH |
and a 47VPL plug; Use Item #47ARLB |
43.00 |
|
|
Esco style standard dirt bucket tooth for a 21 series, takes a 21LK horseshoe lock; Use Item |
|
1233358H1 |
DIRT TOOTH |
#21SYL |
7.06 |
|
|
Esco style dirt bucket tooth for a 27 series, takes a 27LK horseshoe lock or a 27VPN pin and a |
|
1237300H1 |
DIRT TOOTH |
27VPL plug; Use Item #27SYL |
9.26 |
|
|
Esco style standard dirt bucket tooth for a 47 series, takes a 47LK horseshoe lock or a 47VPN pin |
|
1243613H1 |
DIRT TOOTH |
and a 47VPL plug; Use Item #47SYL |
23.81 |
|
|
Esco style dirt bucket tooth for a 57 series. takes a 57LK horseshoe lock or a 57VPN pin and a |
|
1243616H1 |
DIRT TOOTH |
57VPL plug; Use Item #57SYL |
38.36 |
|
|
Esco style tiger bucket tooth for a 37 series, takes a 37LK horseshoe lock or a 37VPN pin and a |
|
1267599H1 |
TIGER TOOTH |
37VPL plug; Use Item #37VIP |
14.27 |
|
|
Esco style dirt bucket tooth for a 37 series, takes a 37LK horseshoe lock or a 37VPN pin and a |
|
1267600H1 |
DIRT TOOTH |
37VPL plug; Use Item #37SYL |
15.87 |
|
|
Esco style tiger bucket tooth for a 47 series, takes a 47LK horseshoe lock or a 47VPN pin and a |
|
1267601H1 |
TIGER TOOTH |
47VPL plug; Use Item #47VIP |
23.81 |
|
|
Esco style tiger bucket tooth for a 57 series, takes a 57LK horseshoe lock or a 57VPN pin and a |
|
1267603H1 |
TIGER TOOTH |
57VPL plug; Use Item #57VIP |
33.95 |
131-78-31190 |
RIPPER TOOTH |
Komatsu style ripper bucket tooth |
23.36 |
141-78-11253 |
RIPPER TOOTH |
Komatsu style ripper bucket tooth, takes a 175-78-21810 pin |
28.16 |
175-78-31230 |
RIPPER TOOTH |
Komatsu style ripper bucket tooth, takes a 175-78-21810 pin |
33.07 |
175-78-31232 |
RIPPER TOOTH |
Komatsu style ripper bucket tooth; takes a 175-78-21810 pin |
33.95 |
175-78-61670 |
RIPPER TOOTH |
Komatsu style ripper tooth |
33.07 |
195-78-21331 |
RIPPER TOOTH |
Komatsu style ripper bucket tooth, takes a 175-78-21810 pin |
40.79 |
195-78-21333 |
RIPPER TOOTH |
Komatsu style ripper bucket tooth; takes a 175-78-21810 pin |
40.79 |
195-78-71320 |
RIPPER TOOTH |
Komatsu style ripper bucket tooth |
59.75 |
198-78-21340 |
DIRT TOOTH |
Komatsu style dirt bucket tooth, takes a 175-78-21810 pin |
85.53 |
202-70-12130 |
DIRT TOOTH |
Komatsu style PC100 standard dirt bucket tooth, takes a 092-44-02496 pin |
9.04 |
202-70-12130-SB |
TOOTH |
Komatsu style SBIC PC100 standard bucket tooth, takes a 092-44-02496 pin |
8.05 |
|
|
Esco style conical, standard dirt bucket tooth for a 30 series; takes a 25-30PN pin and a 25-30LK |
|
203-70-43150 |
DIRT TOOTH |
lock; Use Item # 30S |
5.95 |
|
|
Esco style conical, standard dirt bucket tooth for a 30 series; takes a 25-30PN pin and a 25-30LK |
|
203-70-43180 |
DIRT TOOTH |
lock; Use Item # 30S |
5.95 |
205-70-19570 |
DIRT TOOTH |
Komatsu style PC200 standard dirt bucket tooth, takes a 092-44-02496 pin |
10.47 |
205-70-19570-SB |
TOOTH |
Komatsu style PC200 SBIC standard bucket tooth, takes a 092-44-02496 pin |
8.90 |
205-70-19570RC |
ROCK CHISEL TOOTH |
Komatsu style PC200 rock chisel bucket tooth, takes a 092-44-02496 pin |
11.90 |
205-70-19570TL |
TIGER TOOTH |
Komatsu style PC200 tiger long bucket tooth, takes a 092-44-02496 pin |
12.10 |
|
|
Komatsu style conical, standard dirt bucket tooth for a 35 series, takes a 35PN pin and a 35-40LK |
|
205-70-74272 |
DIRT TOOTH |
lock; Use Item #35S |
9.26 |
|
|
Esco style standard dirt bucket tooth for a 40 series; takes a 40PN pin and a 35-40LK lock; Use |
|
206-70-54221 |
DIRT TOOTH |
Item # 40S |
15.65 |
|
|
Esco style dirt bucket tooth for a 27 series, takes a 27LK horseshoe lock or a 27VPN pin and a |
|
206913A110 |
DIRT TOOTH |
27VPL plug; Use Item #27SYL |
9.26 |
207-70-14151 |
DIRT TOOTH |
Komatsu style PC300 standard dirt bucket tooth, takes a 175-78-21810 pin |
15.98 |
207-70-14151RC |
ROCK CHISEL TOOTH |
Komatsu style PC300 rock chisel bucket tooth, takes a 175-78-21810 pin |
21.27 |
207-70-14151TL |
TIGER TOOTH |
Komatsu style PC300 tiger long bucket tooth, takes a 175-78-21810 pin |
17.85 |
|
|
Esco style standard dirt bucket tooth for a 40 series; takes a 40PN pin and a 35-40LK lock; Use |
|
207-70-34212 |
DIRT TOOTH |
Item # 40S |
15.65 |
|
|
Esco style dirt bucket tooth for a 37 series, takes a 37LK horseshoe lock or a 37VPN pin and a |
|
207913A110 |
DIRT TOOTH |
37VPL plug; Use Item #37SYL |
15.87 |
208-70-14152 |
DIRT TOOTH |
Komatsu style PC400 standard dirt bucket tooth, takes a 092-44-03036 pin |
21.61 |
|
|
|
|
208-70-14152RC |
ROCK CHISEL TOOTH |
Komatsu style PC400 rock chisel bucket tooth, takes a 092-44-03036 pin |
31.97 |
208-70-14270 |
HEAVY DUTY TOOTH |
Komatsu style PC400 heavy duty bucket tooth, takes a 092-44-03036 pin |
30.20 |
208-70-14270TL |
TIGER TOOTH |
Komatsu style PC400 tiger long bucket tooth, takes a 092-44-03036 pin |
28.60 |
|
|
Esco style standard dirt bucket tooth for a 45 series; takes a 45PN pin and a 45LK lock; Use Item |
|
208-70-34211 |
DIRT TOOTH |
# 45S |
20.50 |
|
|
Esco style standard dirt bucket tooth for a 47 series, takes a 47LK horseshoe lock or a 47VPN pin |
|
208913A210 |
DIRT TOOTH |
and a 47VPL plug; Use Item #47SYL |
23.81 |
|
|
Komatsu style unitooth with a .67" lip thickness and a 2.36" bolt hole spacing, center to center; |
|
20T-70-13130 |
UNITOOTH |
takes 2 - 625 X 225 plow bolts and 2 - 625 hex nuts |
5.30 |
|
|
Komatsu style SBIC unitooth with a .67" lip thickness and a 2.36" bolt hole spacing, center to |
|
20T-70-13130-SB |
UNITOOTH |
center; takes 2 - 625 X 225 plow bolts and 2 - 625 hex nuts |
5.30 |
|
|
Esco style standard dirt bucket tooth for an 18 series; takes an 18-20LK lock and an 18-20PN pin; |
|
20T-70-72320 |
DIRT TOOTH |
Use Item # 18TL |
2.43 |
20X-70-14160 |
DIRT TOOTH |
Komatsu style PC60 standard dirt bucket tooth, takes a 20X-70-00100 pin |
5.07 |
|
|
Esco style PC100 conical, standard dirt bucket tooth for a 25 series; takes a 25-30PN pin and a |
|
20X-70-23160 |
DIRT TOOTH |
25-30LK lock; Use Item # 25S |
5.07 |
|
|
Esco style PC100 conical, standard dirt bucket tooth for a 25 series; takes a 25-30PN pin and a |
|
20X-70-23161 |
DIRT TOOTH |
25-30LK lock; Use Item # 25S |
5.07 |
21N-72-14410 |
DIRT TOOTH |
Komatsu style PC1000 dirt bucket tooth, takes a 175-78-21810 pin |
105.40 |
|
|
Esco style dirt bucket tooth for a 30 series, takes a 25-30PN pin and a 25-30LK lock; Use Item |
|
3031710R1 |
DIRT TOOTH |
#30S |
5.95 |
|
|
Esco style standard dirt bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; Use |
|
3034790R1 |
DIRT TOOTH |
Item #40S |
15.65 |
|
|
Esco style dirt bucket tooth for a 30 series, takes a 25-30PN pin and a 25-30LK lock; Use Item |
|
3034797R1 |
DIRT TOOTH |
#30S |
5.95 |
|
|
Esco style standard dirt bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; Use |
|
3150641R1 |
DIRT TOOTH |
Item #40S |
15.65 |
|
|
Esco style rock chisel bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; Use |
|
3150643R1 |
ROCK CHISEL TOOTH |
Item #40RDX |
14.68 |
419-70-13164 |
HEAVY DUTY TOOTH |
Komatsu style heavy duty bucket tooth |
33.07 |
419-70-13174 |
HEAVY DUTY TOOTH |
Komatsu style heavy duty bucket tooth |
33.07 |
423-847-1140 |
DIRT TOOTH |
Komatsu style WA400 standard dirt bucket tooth, takes a 175-78-21740 pin |
18.51 |
423-847-1140-SB |
DIRT TOOTH |
Komatsu style WA400 SBIC standard dirt bucket tooth, takes a 175-78-21740 pin |
17.60 |
426-847-1110 |
DIRT TOOTH |
Komatsu style WA500 standard dirt bucket tooth, takes a 092-44-03036 pin |
26.23 |
426-847-1110-SB |
DIRT TOOTH |
Komatsu style SBIC WA500 standard dirt bucket tooth, takes a 092-44-03036 pin |
25.29 |
427-70-13731 |
DIRT TOOTH |
Komatsu style WA800 standard dirt bucket tooth |
64.00 |
485353-R1 |
CRIMP ON TOOTH |
H&L style heavy duty, crimp on bucket tooth; Use Item #3CHXL |
2.20 |
532948-R1 |
DIRT TOOTH |
H&L style standard dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230 |
2.98 |
|
|
Esco style standard dirt bucket tooth for a 25 series, takes a 25-30PN pin and a 25-30LK lock; |
|
606035C1 |
DIRT TOOTH |
Use Item #25S |
5.07 |
|
|
Esco style standard dirt bucket tooth for a 25 series, takes a 25-30PN pin and a 25-30LK lock; |
|
615687C1 |
DIRT TOOTH |
Use Item #25S |
5.07 |
|
|
Esco style rock chisel bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; Use |
|
615895CJ |
ROCK CHISEL TOOTH |
Item #40RDX |
14.68 |
|
|
Esco style standard dirt bucket tooth for an 18 series, takes an 18-20LK lock and an 18-20PN pin; |
|
620834C1 |
DIRT TOOTH |
Use Item #18TL |
2.43 |
63090 |
DIRT TOOTH |
H&L style standard dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230 |
2.98 |
63091 |
DIRT TOOTH |
H&L style standard dirt bucket tooth for a 240 series, takes a 24FP flex pin; Use Item #240 |
4.19 |
637587-R1 |
DIRT TOOTH |
H&L style standard dirt bucket tooth for a 240 series, takes a 24FP flex pin; Use Item #240 |
4.19 |
637589-R1 |
DIRT TOOTH |
H&L style standard dirt bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250 |
7.06 |
|
|
Esco style tiger bucket tooth for a 25 series, takes a 25-30PN pin and a 25-30LK lock; Use Item |
|
637608C1 |
TIGER TOOTH |
#25VIP |
5.87 |
|
|
Esco style standard dirt bucket tooth for a 35 series, takes a 35PN pin and a 35-40LK lock; Use |
|
637613C1 |
DIRT TOOTH |
Item #35S |
9.26 |
|
|
Esco style tiger bucket tooth for a 35 series, takes a 35PN pin and a 35-40LK lock; Use Item |
|
637615C1 |
TIGER TOOTH |
#35VIP |
7.94 |
|
|
Esco style tiger bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; Use Item |
|
637619C1 |
TIGER TOOTH |
#40VIP |
16.53 |
|
|
Esco style standard dirt bucket tooth for a 45 series, takes a 45PN pin and a 45LK lock; Use Item |
|
637623C1 |
DIRT TOOTH |
#45S |
20.50 |
637624C1 |
TIGER TOOTH |
Esco style tiger bucket tooth for a 45 series, takes a 45PN pin and a 45LK lock; Use Item #45VIP |
17.20 |
|
|
Esco style 15" ripper bucket tooth for a 35 series, takes a 35RPG pin and a 35RBG bushing; Use |
|
668977C1 |
RIPPER TOOTH |
Item #35R15-2A |
28.44 |
710222-C1 |
DIRT TOOTH |
H&L style standard dirt bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250 |
7.06 |
711524-C1 |
DIRT TOOTH |
H&L style standard dirt bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250 |
7.06 |
711525-C1 |
DIRT TOOTH |
H&L style standard dirt bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250 |
7.06 |
E161-3027WTL |
TWIN TIGER TOOTH |
Komatsu style twin tiger bucket tooth, takes a 9J2358 pin and a 3G9549 sleeved retainer |
9.35 |
|
|
Komatsu style PC100 standard dirt bucket tooth, takes a 092-44-02496 pin; Use Item # 202-70- |
|
PC100 |
DIRT TOOTH |
12130 |
9.04 |
|
|
Komatsu style PC200 standard dirt bucket tooth, takes a 092-44-02496 pin; Use Item # 205-70- |
|
PC200 |
DIRT TOOTH |
19570 |
10.47 |
|
|
Komatsu style PC300 standard dirt bucket tooth, takes a 175-78-21810 pin; Use Item # 207-70- |
|
PC300 |
DIRT TOOTH |
14151 |
15.98 |
PC400 |
DIRT TOOTH |
Komatsu style standard dirt bucket tooth, takes a 092-44-03036 pin; Use Item # 208-70-14152 |
21.61 |
PC60 |
DIRT TOOTH |
Komatsu style standard dirt bucket tooth, takes a 21N-72-14330 pin; Use Item # 20X-70-14160 |
5.07 |
|
|
Komatsu style unitooth with a .67" lip thickness and a 2.36" bolt hole spacing, center to center; |
|
SX130 UNITOOTH |
UNITOOTH |
takes 2 - 625 X 225 plow bolts and 2 - 625 hex nuts; Use Item # 20T-70-13130 |
5.30 |
Kubota Style Parts |
|
|
|
Kubota Style Adapters |
|
|
|
|
|
Hensley style weld on adapter for a 156 series bucket tooth with a 1" lip thickness; Use Item # |
|
70090-20853 |
WELD ON ADAPTER |
X550-156 |
4.40 |
|
|
|
|
70090-32082 |
WELD ON ADAPTER |
Hensley style weld on adapter for a 156 series with a 5/8" lip thickness; Use Item #X230-156 |
3.81 |
|
|
H&L style weld on, excavator adapter with a 1" lip thickness for a 230 series bucket tooth; Use |
|
70090-33096 |
WELD ON ADAPTER |
Item # 834-23 |
3.04 |
|
|
H&L style weld on, wrap around adapter with a 1 1/4" lip thickness for a 240 series bucket tooth; |
|
70090-33111 |
WELD ON ADAPTER |
Use Item # 2740W24 |
4.76 |
Kubota Style Cutting Edges |
|
|
|
|
|
Kubota bolt on center cutting edge, takes 7 of a 625X200 plow bolt and 7 of a 625 Hex Nut, the |
|
3/8 X 4 X 48 |
CENTER CUTTING EDGE |
bolt hole spacing is 6" from center to center of the bolt holes |
41.89 |
Kubota Style Pins |
|
|
|
|
|
Hensley style roll pin for a 156 series bucket tooth, this pin is 2" long and has a .375" pin |
|
70090-32084 |
ROLL PIN |
diameter; Use Item #P156 |
0.04 |
70090-33094 |
PIN |
Esco style pin, goes with an 18-20LK lock; Use Item #18-20PN |
0.09 |
70090-33107 |
FLEX PIN |
H&L style flex pin for a 230 series bucket tooth; Use Item #23FP |
0.09 |
70090-33108 |
ROLL PIN |
Hensley style roll pin for a 156 series bucket tooth; Use Item # P156 |
0.04 |
Kubota Style Retainers |
|
|
|
70090-33095 |
RUBBER LOCK |
Esco style rubber lock, takes an 18-20PN pin; Use Item #18-20LK |
0.02 |
Kubota Style Shanks |
|
|
|
|
|
H&L style gannon shank for a 1 3/4" bucket tooth; it is 16" long, 2 3/8" wide and 5/8" thick; Use |
|
70050-93015 |
SCARIFIER SHANK |
Item # H920 |
7.72 |
Kubota Style Sidecutters |
|
|
|
|
|
Kubota style Left Hand sidecutter for a skid steer, takes 3-625X200 Plow Bolts and 3-625 Hex |
|
106762LH |
LH SIDECUTTER |
Nuts, bolt hole spacing is 2.875" and 4" |
9.00 |
|
|
Kubota style Left Hand sidecutter for a skid steer, takes 3-625X200 Plow Bolts and 3-625 Hex |
|
106763RH |
RH SIDECUTTER |
Nuts, bolt hole spacing is 2.875" and 4" |
9.00 |
Kubota Style Teeth |
|
|
|
|
|
Kubota style unitooth with a .63" lip thickness and a 2.16" bolt hole spacing, center to center; |
|
6691 |
UNITOOTH |
takes 2 - 5/8" x 2" CS cap screws and 2 - 5/8" CS nuts |
4.60 |
70050-93014 |
CRIMP ON TOOTH |
Fabricated style scarifier/ripper crimp-on bucket tooth; Use Item # 1 3/4F |
1.20 |
70090-32083 |
DIRT TOOTH |
Hensley style dirt bucket tooth for a 156 series, takes a P156 roll pin; Use Item #X156 |
1.20 |
70090-32086 |
LONG TOOTH |
Hensley style long dirt bucket tooth for a 156 series, takes a P156 roll pin; Use Item #X156L |
1.76 |
70090-32087 |
HD TOOTH |
Hensley style heavy duty bucket tooth for a 156 series, takes a P156 roll pin; Use Item # X156LP |
3.04 |
70090-32088 |
FLARE TOOTH |
Hensley style flare bucket tooth for a 156 series, takes a P156 roll pin; Use Item # X156F |
2.87 |
70090-32089 |
TIGER TOOTH |
Hensley style tiger bucket tooth for a 156 series, takes a P156 roll pin; Use Item #X156T |
2.57 |
70090-32090 |
TWIN TIGER TOOTH |
Hensley style twin tiger bucket tooth for a 156 series, takes a P156 roll pin; Use Item #X156WT |
2.65 |
70090-32091 |
HD TOOTH |
Hensley style heavy duty bucket tooth for a 156 series, takes a P156 roll pin; Use Item #X156LP |
3.04 |
70090-33080 |
STAR TOOTH |
H&L style star bucket tooth for a 230 series, takes a 23FP flex pin; Use Item # 230ST |
2.65 |
|
|
Esco style standard dirt bucket tooth for an 18 series; takes an 18-20LK lock and an 18-20PN pin; |
|
70090-33090 |
DIRT TOOTH |
Use Item # 18TL |
2.43 |
|
|
Esco style standard dirt bucket tooth for an 18 series; takes an 18-20LK lock and an 18-20PN pin; |
|
70090-33092 |
DIRT TOOTH |
Use Item # 18TL |
2.43 |
70090-33101 |
DIRT TOOTH |
H&L style dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230 |
2.98 |
70090-33103 |
FLARE TOOTH |
H&L style flare bucket tooth for a 230 series, takes a 23FP flex pin; Use Item # 230F |
3.37 |
70090-33104 |
TIGER TOOTH |
H&L style heavy duty tiger bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230T |
2.51 |
70090-33105 |
TWIN TIGER TOOTH |
H&L style twin tiger bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230WT |
3.61 |
70090-33106 |
STAR TOOTH |
H&L style star bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230ST |
2.65 |
70090-33110 |
DIRT TOOTH |
H&L style standard dirt bucket tooth for a 240 series, takes a 24FP flex pin; Use Item # 240 |
4.19 |
Liebherr Style Parts |
|
|
|
Liebherr Style Pins |
|
|
|
5934322 |
PIN |
Esco style pin for a 40 series bucket tooth, takes a 35-40LK lock; Use Item #40PN |
0.57 |
5934323 |
PIN |
Esco style pin for a 55 series bucket tooth, takes a 55LK lock; Use Item #55PN |
0.99 |
5934324 |
PIN |
Esco style pin for a 45 series bucket tooth, takes a 45LK lock; Use Item #45PN |
0.33 |
5934325 |
PIN |
Esco style pin for a 50 series bucket tooth, takes a 50LK lock; Use Item #50PN |
0.79 |
Liebherr Style Retainers |
|
|
|
|
|
Esco style rubber lock for a 35 and a 40 series bucket tooth, takes a 35-40PN pin; Use Item #35- |
|
5934222 |
RUBBER LOCK |
40LK |
0.11 |
5934223 |
RUBBER LOCK |
Esco style rubber lock for a 55 series bucket tooth, takes a 55PN pin; Use Item #55LK |
0.50 |
5934224 |
RUBBER LOCK |
Esco style rubber lock for a 45 series bucket tooth, takes a 45PN pin; Use Item #45LK |
0.11 |
5934225 |
RUBBER LOCK |
Esco style rubber lock for a 50 series bucket tooth, takes a 50PN pin; Use Item #50LK |
0.44 |
Liebherr Style Teeth |
|
|
|
|
|
Esco style conical, standard dirt bucket tooth for a 25 series, takes a 25-30PN pin and a 25-30LK |
|
5934568 |
DIRT TOOTH |
lock; Use Item #25S |
5.07 |
|
|
Esco style standard dirt bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; Use |
|
5934575 |
DIRT TOOTH |
Item #40S |
15.65 |
|
|
Esco style standard dirt bucket tooth for a 45 series, takes a 45PN pin and a 45LK lock; Use Item |
|
5934576 |
DIRT TOOTH |
#45S |
20.50 |
|
|
Esco style rock chisel bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; Use |
|
5934577 |
ROCK CHISEL TOOTH |
Item #40RDX |
14.68 |
|
|
Esco style rock chisel bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; Use |
|
5934579 |
ROCK CHISEL TOOTH |
Item #40RDX |
14.68 |
|
|
Esco style rock chisel bucket tooth for a 50 series, takes a 50PN pin and a 50LK lock; Use Item |
|
5934580 |
ROCK CHISEL TOOTH |
#50R |
23.15 |
|
|
Esco style rock chisel bucket tooth for a 50 series, takes a 50PN pin and a 50LK lock; Use Item |
|
5934589 |
ROCK CHISEL TOOTH |
#50R |
23.15 |
5934800 |
TIGER TOOTH |
H&L style tiger bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250T |
6.19 |
|
|
Esco style conical, standard dirt bucket tooth for a 30 series, takes a 25-30PN pin and a 25-30LK |
|
5934803 |
DIRT TOOTH |
lock; Use Item #30S |
5.95 |
|
|
Esco style standard dirt bucket tooth for a 45 series, takes a 45PN pin and a 45LK lock; Use Item |
|
5934806 |
DIRT TOOTH |
#45S |
20.50 |
|
|
|
|
5934810 |
DIRT TOOTH |
#45S |
20.50 |
|
|
Esco style conical, standard dirt bucket tooth for a 30 series, takes a 25-30PN pin and a 25-30LK |
|
5934818 |
DIRT TOOTH |
lock; Use Item #30S |
5.95 |
Linkbelt Style Parts |
|
|
|
Linkbelt Style Pins |
|
|
|
3V-38 |
FLEX PIN |
H&L style flex pin for a 27 series bucket tooth; Use Item #27FP |
0.20 |
3V0072 |
PIN |
Esco style pin for a 40 series bucket tooth, takes a 35-40LK lock; Use Item #40PN |
0.57 |
3V0074 |
PIN |
Esco style pin for a 45 series bucket tooth, takes a 35-40LK lock; Use Item #45PN |
0.33 |
3V0277 |
PIN |
Esco style pin for a 25R series bucket tooth, takes a 25RBG bushing; Use Item #25RPG |
0.11 |
3V0383 |
PIN |
Esco style pin for a 50 series bucket tooth, takes a 50LK lock; Use Item #50PN |
0.79 |
3V0650 |
RIPPER PIN |
Esco style pin for a 35R series bucket tooth, takes a 35RBG bushing; Use Item #35RPG |
0.20 |
3V0711 |
PIN |
Esco style pin for a 25 and a 30 series bucket tooth, takes a 25-30LK lock; Use Item #25-30PN |
0.20 |
3V0712 |
PIN |
Esco style pin for a 35 series bucket tooth, takes a 35-40LK lock; Use Item #35PN |
0.22 |
3V0714 |
PIN |
Esco style pin for a 55 series bucket tooth, takes a 55LK lock; Use Item #55PN |
0.99 |
3V0741 |
SPOOL |
Esco style spool, takes a 29W1W wedge; Use Item #29SPS |
1.10 |
|
|
Esco style ratchet pin for a 40 series bucket tooth, takes a 35-40LKR ratchet lock; Use Item |
|
3V0752 |
RATCHET PIN |
#40PNR |
0.26 |
3V0812 |
PIN |
Esco style pin for an 18 and a 20 series bucket tooth, takes an 18-20LK lock; Use Item #18-20PN |
0.09 |
|
|
Esco style ratchet pin for a 25 and a 30 series bucket tooth, takes a 25-30LKR lock; Use Item #25- |
|
3V1138 |
RATCHET PIN |
30PNR |
0.20 |
3V1140 |
RATCHET PIN |
Esco style ratchet pin for a 35 series bucket tooth, takes a 35LKR ratchet lock; Use Item #35PNR |
0.22 |
3V1141 |
RATCHET PIN |
Esco style ratchet pin for a 45 series bucket tooth, takes a 45LKR ratchet lock; Use Item #45PNR |
0.70 |
3V1143 |
RATCHET PIN |
Esco style ratchet pin for a 50 series bucket tooth, takes a 50LKR ratchet lock; Use Item #50PNR |
0.80 |
3V1145 |
RATCHET PIN |
Esco style ratchet pin for a 55 series bucket tooth, takes a 55LKR ratchet lock; Use Item #55PNR |
0.80 |
3V60 |
PIN |
Esco style pin for a 45 series bucket tooth, takes a 45LK lock; Use Item #45PN |
0.33 |
3V72 |
PIN |
Esco style pin for a 40 series bucket tooth, takes a 35-40LK lock; Use Item #40PN |
0.57 |
Linkbelt Style Retainers |
|
|
|
3V0060 |
RUBBER LOCK |
Esco style lock for a 45 series bucket tooth, takes a 45PN pin; Use Item #45LK |
0.11 |
3V0073 |
RUBBER LOCK |
Esco style lock for a 35 and a 40 series bucket tooth; Use Item #35-40LK |
0.11 |
|
|
Esco style rubber lock for a 25 and a 30 series bucket tooth, takes a 25-30PN pin; Use Item #25- |
|
3V0082 |
RUBBER LOCK |
30LK |
0.02 |
3V0276 |
BUSHING |
Esco style bushing for a 25R series bucket tooth, takes a 25RPG pin; Use Item #25RBG |
0.22 |
3V0382 |
RUBBER LOCK |
Esco style rubber lock for a 50 series bucket tooth, takes a 50PN pin; Use Item #50LK |
0.44 |
3V0649 |
BUSHING |
Esco style bushing for a 35R series bucket tooth, takes a 35RPG pin; Use Item #35RBG |
0.04 |
3V0713 |
RUBBER LOCK |
Esco style rubber lock for a 55 series bucket tooth, takes a 55PN pin; Use Item #55LK |
0.50 |
3V0740 |
WEDGE |
Esco style fluted wedge, takes a 29SPS spool; Use Item #29W1W |
1.65 |
|
|
Esco style ratchet lock for a 35 and a 40 series bucket tooth, takes a 40PNR pin; Use Item #35- |
|
3V0751 |
RATCHET LOCK |
40LKR |
0.11 |
3V0813 |
RUBBER LOCK |
Esco style lock for an 18 series bucket tooth, takes an 18-20PN pin; Use Item #18-20LK |
0.02 |
|
|
Esco style ratchet lock for a 25 and a 30 series bucket tooth, takes a 25-30PNR pin; Use Item |
|
3V1139 |
RATCHET LOCK |
#25-30LKR |
0.02 |
3V1142 |
RATCHET LOCK |
Esco style ratchet lock for a 45 series bucket tooth, takes a 45PNR ratchet pin; Use Item #45LKR |
0.11 |
3V1144 |
RATCHET LOCK |
Esco style ratchet lock for a 50 series bucket tooth, takes a 50PNR ratchet pin; Use Item #50LKR |
0.15 |
3V1146 |
RATCHET LOCK |
Esco style ratchet lock for a 55 series bucket tooth, takes a 55PNR ratchet pin; Use Item #55LKR |
0.15 |
3V1173 |
LOCK |
Esco style horseshoe lock for a 47 series bucket tooth; Use Item #47LK |
0.79 |
3V1178 |
LOCK |
Esco style horseshoe lock for a 57 series bucket tooth; Use Item #57LK |
0.90 |
3V1195 |
LOCK |
Esco style horseshoe lock for a 37 series bucket tooth; Use Item #37LK |
0.70 |
3V1201 |
LOCK |
Esco style horseshoe lock for a 21 series bucket tooth; Use Item #21LK |
0.33 |
3V1350 |
LOCK |
Esco style horseshoe lock for a 21 series bucket tooth; Use Item #21LK |
0.33 |
3V1352 |
LOCK |
Esco style horseshoe lock for a 37 series bucket tooth; Use Item #37LK |
0.70 |
3V1353 |
LOCK |
Esco style horseshoe lock for a 47 series bucket tooth; Use Item #47LK |
0.79 |
3V1354 |
LOCK |
Esco style horseshoe lock for a 57 series bucket tooth; Use Item #57LK |
0.90 |
3V383 |
RUBBER LOCK |
Esco style rubber lock for a 50 series bucket tooth, takes a 50PN pin; Use Item #50LK |
0.44 |
3V73 |
RUBBER LOCK |
Esco style lock for a 35 and a 40 series bucket tooth; Use Item #35-40LK |
0.11 |
3V74 |
RUBBER LOCK |
Esco style lock for a 45 series bucket tooth, takes a 45PN pin; Use Item #45LK |
0.11 |
Linkbelt Style Teeth |
|
|
|
17V-341 |
DIRT TOOTH |
H&L style dirt bucket tooth, takes a 2AP roll pin; Use Item #2AC |
1.34 |
3V-37 |
DIRT TOOTH |
H&L style standard dirt bucket tooth for a 270 series, takes a 27FP flex pin; Use Item #270 |
8.16 |
|
|
Esco style standard dirt bucket tooth for a 45 series, takes a 45PN pin and a 45LK lock; Use Item |
|
3V0061 |
DIRT TOOTH |
#45S |
20.50 |
|
|
Esco style standard dirt bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; Use |
|
3V0071 |
DIRT TOOTH |
Item #40S |
15.65 |
|
|
Esco style standard dirt bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; Use |
|
3V0076 |
DIRT TOOTH |
Item #40S |
15.65 |
|
|
Esco style 11" long ripper bucket tooth for a 25 series, takes a 25RPG pin and a 25RBG bushing; |
|
3V0278 |
RIPPER TOOTH |
Use Item #25R11-2 |
11.24 |
3V0384 |
DIRT TOOTH |
Esco style dirt bucket tooth for a 50 series, takes a 50PN pin and a 50LK lock; Use Item #50S |
24.43 |
|
|
Esco style ripper bucket tooth for a 35 series, takes a 35RPG pin and a 35RBG bushing; Use |
|
3V0648 |
RIPPER TOOTH |
Item #35R14-2 |
28.88 |
|
|
Esco style 7" conical, flare bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; |
|
3V0701 |
FLARE TOOTH |
Use Item #40S7F |
15.20 |
|
|
|
|
3V0703 |
TIGER TOOTH |
#40VIP |
16.53 |
|
|
Esco style conical dirt bucket tooth for a 25 series, takes a 25-30PN pin and a 25-30LK lock; Use |
|
3V0704 |
DIRT TOOTH |
Item #25S |
5.07 |
|
|
Esco style tiger bucket tooth for a 25 series, takes a 25-30PN pin and a 25-30LK lock; Use Item |
|
3V0705 |
TIGER TOOTH |
#25VIP |
5.87 |
|
|
Esco style standard dirt bucket tooth for a 35 series, takes a 35PN pin and a 35-40LK lock; Use |
|
3V0706 |
DIRT TOOTH |
Item #35S |
9.26 |
|
|
Esco style tiger bucket tooth for a 35 series, takes a 35PN pin and a 35-40LK lock; Use Item |
|
3V0707 |
TIGER TOOTH |
#35VIP |
7.94 |
3V0708 |
TIGER TOOTH |
Esco style tiger bucket tooth for a 45 series, takes a 45PN pin and a 45LK lock; Use Item #45VIP |
17.20 |
|
|
Esco style rock chisel bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; Use |
|
3V0725 |
ROCK CHISEL TOOTH |
Item #40RDX |
14.68 |
3V0730 |
TIGER TOOTH |
Esco style tiger bucket tooth for a 50 series, takes a 50PN pin and a 50LK lock; Use Item #50VIP |
30.20 |
|
|
Esco style twin tiger bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; Use Item |
|
3V0734 |
TWIN TIGER TOOTH |
#40TVIP |
18.72 |
|
|
Esco style twin tiger bucket tooth for a 45 series, takes a 45PN pin and a 45LK lock; Use Item |
|
3V0735 |
TWIN TIGER TOOTH |
#45TVIP |
18.87 |
|
|
Esco style standard, conical dirt bucket tooth for a 30 series, takes a 25-30LK lock and a 25- |
|
3V0748 |
DIRT TOOTH |
30PN pin; Use Item #30S |
5.95 |
3V0753 |
ROCK TOOTH |
Esco style rock bucket tooth for a 50 series, takes a 50PN pin and a 50LK lock; Use Item #50R |
23.15 |
|
|
Esco style standard dirt bucket tooth for an 18 series, takes an 18-20PN pin and an 18-20LK lock; |
|
3V0811 |
DIRT TOOTH |
Use Item #18TL |
2.43 |
3V0818 |
ROCK TOOTH |
Esco style rock bucket tooth for a 55 series, takes a 55PN pin and a 55LK lock; Use Item #55LP |
37.50 |
|
|
Esco style rock chisel bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; Use |
|
3V0823 |
ROCK CHISEL TOOTH |
Item #40RDX |
14.68 |
|
|
Esco style standard, conical dirt bucket tooth for a 25 series, takes a 25-30PN pin and a 25-30LK |
|
3V1031 |
DIRT TOOTH |
lock; Use Item #25S |
5.07 |
|
|
Esco style standard, conical dirt bucket tooth for a 30 series, takes a 25-30LK lock and a 25- |
|
3V1037 |
DIRT TOOTH |
30PN pin; Use Item #30S |
5.95 |
|
|
Esco style tiger bucket tooth for a 30 series, takes a 25-30PN pin and a 25-30LK lock; Use Item |
|
3V1049 |
TIGER TOOTH |
#30VIP |
6.17 |
|
|
Esco style rock chisel bucket tooth for a 35 series, takes a 35PN pin and a 35-40LK lock; Use |
|
3V1052 |
ROCK CHISEL TOOTH |
Item #35R |
7.50 |
|
|
Esco style flare, conical bucket tooth for a 35 series, takes a 35PN pin and a 35-40LK lock; Use |
|
3V1053 |
FLARE TOOTH |
Item #35S6F |
14.90 |
|
|
Esco style standard dirt bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; Use |
|
3V1059 |
DIRT TOOTH |
Item #40S |
15.65 |
|
|
Esco style standard dirt bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; Use |
|
3V1061 |
DIRT TOOTH |
Item #40S |
15.65 |
|
|
Esco style flare, 6" conical bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; |
|
3V1062 |
FLARE TOOTH |
Use Item #40S6F |
13.67 |
|
|
Esco style standard dirt bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; Use |
|
3V1063 |
DIRT TOOTH |
Item #40S |
15.65 |
|
|
Esco style standard dirt bucket tooth for a 45 series, takes a 45PN pin and a 45LK lock; Use Item |
|
3V1065 |
DIRT TOOTH |
#45S |
20.50 |
|
|
Esco style conical, flare bucket tooth for a 45 series, takes a 45PN pin and a 45LK lock; Use Item |
|
3V1069 |
FLARE TOOTH |
#45S8F |
28.44 |
|
|
Esco style standard dirt bucket tooth for a 45 series, takes a 45PN pin and a 45LK lock; Use Item |
|
3V1070 |
DIRT TOOTH |
#45S |
20.50 |
3V1080 |
DIRT TOOTH |
Esco style dirt bucket tooth for a 50 series, takes a 50PN pin and a 50LK lock; Use Item #50S |
24.43 |
|
|
Esco style tiger bucket tooth for an 18 series, takes an 18-20PN pin and an 18-20LK lock; Use |
|
3V1103 |
TIGER TOOTH |
Item #18VIP |
1.76 |
|
|
Esco style tiger bucket tooth for a 35 series, takes a 35PN pin and a 35-40LK lock; Use Item |
|
3V1104 |
TIGER TOOTH |
#35VIP |
7.94 |
|
|
Esco style twin tiger bucket tooth for a 35 series, takes a 35PN pin and a 35-40LK lock; Use Item |
|
3V1105 |
TWIN TIGER TOOTH |
#35TVIP |
12.80 |
|
|
Esco style tiger bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; Use Item |
|
3V1106 |
TIGER TOOTH |
#40VIP |
16.53 |
3V1107 |
TIGER TOOTH |
Esco style tiger bucket tooth for a 45 series, takes a 45PN pin and a 45LK lock; Use Item #45VIP |
17.20 |
3V1108 |
TIGER TOOTH |
Esco style tiger bucket tooth for a 50 series, takes a 50PN pin and a 50LK lock; Use Item #50VIP |
30.20 |
|
|
Esco style dirt bucket tooth for a 57 series, takes a 57LK horseshoe lock or a 57VPN pin and a |
|
3V1179 |
DIRT TOOTH |
57VPL plug; Use Item #57SYL |
38.36 |
|
|
Esco style tiger bucket tooth for a 57 series, takes a 57LK horseshoe lock or a 57VPN pin and a |
|
3V1180 |
TIGER TOOTH |
57VPL plug; Use Item #57VIP |
33.95 |
|
|
Esco style abrasion bucket tooth for a 47 series, takes a 47LK horseshoe lock or a 47VPN pin |
|
3V1184 |
ABRASION TOOTH |
and a 47VPL plug; Use Item #47ARLB |
43.00 |
|
|
Esco style rock bucket tooth for a 47 series, takes a 47LK horseshoe lock or a 47VPN pin and a |
|
3V1185 |
ROCK TOOTH |
47VPL plug; Use Item #47LP |
19.00 |
|
|
Esco style rock chisel bucket tooth for a 47 series, takes a 47LK horseshoe lock or a 47VPN pin |
|
3V1186 |
ROCK CHISEL TOOTH |
and a 47VPL plug; Use Item #47R |
23.00 |
|
|
Esco style twin tiger bucket tooth for a 47 series, takes a 47LK horseshoe lock or a 47VPN pin |
|
3V1187 |
TWIN TIGER TOOTH |
and a 47VPL plug; Use Item #47TVIP |
26.90 |
|
|
Esco style tiger bucket tooth for a 47 series, takes a 47LK horseshoe lock or a 47VPN pin and a |
|
3V1188 |
TIGER TOOTH |
47VPL plug; Use Item #47VIP |
23.81 |
|
|
Esco style twin tiger bucket tooth for a 27 series, takes a 27LK horseshoe lock or a 27VPN pin |
|
3V1207 |
TWIN TIGER TOOTH |
and a 27VPL plug; Use Item #27TVIP |
10.58 |
|
|
Esco style tiger bucket tooth for a 27 series, takes a 27LK horseshoe lock or a 27VPN pin and a |
|
3V1208 |
TIGER TOOTH |
27VPL plug; Use Item #27VIP |
9.47 |
|
|
Esco style twin tiger bucket tooth for a 37 series, takes a 37LK horseshoe lock or a 37VPN pin |
|
3V1215 |
TWIN TIGER TOOTH |
and a 37VPL plug; Use Item #37TVIP |
17.41 |